Graco 24K864 Microscope & Magnifier User Manual


 
DataTrak Controls and Indicators
6 313840G
DataTrak Controls and Indicators
Key
AA Runaway Limit, in cycles per minute (user settable;
00=OFF)
AB Displacement (user settable)
AC Flow Rate Units (user settable to gpm [US],
gpm [Imperial], oz/min [US], oz/min [Imperial], l/min, or
cc/min)
AD LED (fault indicator when flashing)
AE Display
PF Prime/Flush Key (Enables Prime/Flush mode. While in
Prime/Flush mode, runaway protection is disabled and the
batch totalizer [BT] will not count.) LED will flash while in
Prime/Flush mode.
RK Reset Key (Resets faults. Press and hold for 3 seconds to
clear the batch totalizer.) Push to toggle between flow rate
and cycle rate.
CF Cycle/Flow Rate
BT Batch Totalizer (resettable)
GT Grand Totalizer (not resettable)
/min,
Fig. 1. DataTrak Controls and Indicators
AD
AE, see details at right
CF BT
GT
AC
AA
PF
RK
AB
Run Mode
Setup Mode
TI11883a
RK
PF
ti8622b
ti8623b