Filter
Top Products
For Axillary (Underarm) Measurement
The thermometer is ready
to use when the body part
symbol is flashing.
Press the Mode button until
you see the Axillary
measurement icon. Once
the icon is showing, allow
the thermometer to stay
idle for 8 seconds before
taking a measurement.
Make sure the underarm is
dry and there is no material
between the side and the
arm. Hold the arm close
to the side for 5 minutes
before taking a temperature
reading. Point the
thermometer upward and
place the tip well in the
underarm.
Hold the thermometer
with the tip slightly
bent and the arm firmly
pressed against the side for
approximately 10 seconds.
You will hear a 5 beeps
when the temperature
reading is complete.