Filter
Top Products
Compass Onwer’s Manual – Models GP600 SS, GP600 CC, GP601SS, GP601 CC Revised 060208
27
OPERATION
Figure 18 Figure 19
FREEWHEEL MODE
♦
To disengage the gears and put your power chair in freewheel mode, turn the
freewheel levers as shown. See figure 18.
♦ To re-engage the gears and take your chair out of freewheel mode, turn the levers as
shown. See figure 19.
1. Never put your power chair in freewheel mode when it is on a slope or incline
of
any type.
2. Never put your power chair in freewheel mode while you are operating your
power chair.
THERMAL ROLLBACK
Your Compass
™
is equipped with a safety system. A microprocessor monitors the
operating temperatures of the controller. In the event of excessive heat occurring in the
controller, the controller will decrease the speed of your chair. This is done to reduce
the load on the electrical system and allow the components to dissipate heat. The
controller will automatically set the chair’s speed back to full normal when the
operating temperature returns to normal levels.
THE MAIN CIRCUIT BREAKER
The main circuit breaker is another safety feature incorporated into your Compass
™
.
This device monitors the amount of current being drawn from the batteries when the
chair is in use. When the motors are heavily strained and too high a current draw is
being placed on the batteries, the main circuit breaker will trip and bring your chair
to a stop.