Filter
Top Products
Part No. 35566 Genie Lift 9
Operator's ManualFirst Edition • Seventh Printing
Pre-operation Inspection
R Be sure that the operator’s manual is complete,
legible and available for reference.
R Be sure that all decals are legible and in place.
See Decals section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
R Winch and related components
R Base components
R Legs
R Roller wheels
R Inner and outer frames
R Glide buttons
R Carriage hold-down assembly
R Cable anchor
R Cable and pulleys
R Wheels and casters
R Forks
R Load platform and boom (if equipped)
R Nuts, bolts and other fasteners
R Cable (kinks, frays, abrasions)
R Ladder (if equipped)
R Brake system (if equipped)
R Limit switch (electric winch models)
R Electric winch and related components
(if equipped)
R Hand controls and wiring (electric winch
models)
PRE-OPERATION INSPECTION
Check the entire machine for:
R Dents or damage
R Corrosion or oxidation
R Cracks in welds or structural components
R Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
R Inspect and clean the battery terminals and all
battery cable connections.
R Be sure there is a minimum of 4 wraps of cable
around the winch drum when the carriage is
fully lowered.
R Be sure the frame channels are properly
lubricated and free of debris. Lubricate the
channels with a dry silicone spray or silicone
wax (Genie part number 90337).