Filter
Top Products
10 Genie Superlift Contractor Part No. 33547
Operator's Manual First Edition • Eighth Printing
Load Handling Attachments
Standard Forks and Standard Fork Options
1 Place the forks inside the carriage.
2 Insert the retaining pin.
Load Platform with Standard Forks
1 Place the load platform securely on the standard
forks.
Pipe Cradle
1 Attach the pipe cradles to the forks. Be sure the
fasteners are tightened.
Fork Extension
1 Slide each extension tube onto the fork.
2 Adjust to the desired position and insert the
retaining pins.
Function Tests
1 Select a test area that is firm, level and free of
obstructions.
Setup
Machines Without Stabilizers
1 Remove the leg retainer pin and lower the leg to
the down position. Insert the pin through the leg
and base.
Machines With Stabilizers
1 Push down to release the
stabilizer lock plates and
lower the stabilizers until the
casters are in full contact
with the ground. Be sure the
stabilizers are locked in the
down position.
2 Remove the leg retainer pin and lower the leg to
the down position. Insert the pin through the leg
and base.
FUNCTION TESTS