Filter
Top Products
Symbol Description
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 refers to the
level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE CATE
-
GORY II is energy-consuming equipment to be supplied from the fixed installation. Exam
-
ples include household, office, and laboratory appliances.
C-TIC Australian EMC Mark
1.2 Safety Information
Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.
The following definitions apply to the terms “Warning” and “Caution”.
“Warning” identifies conditions and actions that may pose hazards to the user.
“Caution” identifies conditions and actions that may damage the instrument be-
ing used.
1.2.1
Warnings
To avoid personal injury, follow these guidelines.
• DO NOT use this instrument to measure the temperature of any hazard-
ous live component.
•
Use of this instrument at high temperatures for extended periods of time
can cause the handle to become hot.
•
Follow all safety guidelines listed in the user’s manual.
•
Calibration Equipment should only be used by Trained Personnel.
1.2.2
Cautions
To avoid possible damage to the instrument, follow these guidelines.
•
DO NOT drop or bang the probe in any way. This will cause damage to
the probe internally and affect its calibration.
•
Read Section 5 entitled “PRT Care and Handling Guidelines” before re
-
moving the PRT from the shipping box. Incorrect handling can damage
the PRT and void the warranty.
2 Hart Scientific
1 Before You Start
CAT