Filter
Top Products
Stik Thermometer
Maintenance
11
Logging Interval
Push C to enter the data edit mode. ENTER is ignored if presently logging data.
K Change the logging interval setting to the subsequent item in the list, cycling
from the last to the first.
L Change the logging interval setting to the previous item in the list, cycling from
the first to the last.
C Return to the corresponding menu item.
Send Logged Data
Push C to:
K or L Confirm or cancel the choice to send data.
C Send or cancel data.
C is ignored if presently logging data.
Erase Logged Data
Push C to:
K or L Confirm or cancel the choice to erase logged data.
C Erase or cancel data erase.
C is ignored if presently logging data.
Maintenance
Clean the Product
WCaution
To prevent possible damage to the product or to equipment
under test, do not use abrasive cleaners. They will damage the
case.
To clean the Product, use a cloth with a mild cleaning solution.
Battery Replacement
XWWarning
To prevent possible explosion, fire, or personal injury:
• Change the batteries only in areas that are not Ex-hazardous.
• Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
WCaution
To prevent possible damage to the Product or to equipment
under test:
• Remove batteries to prevent battery leakage and damage to
the Product if it is not used for an extended period.
• Be sure that the battery polarity is correct to prevent battery
leakage.