Filter
Top Products
Assembly
1
4
•Locate the connector coming from underside of the chair bottom.
•Insert the connector into the socket on the table leg, as shown.
1
7
•Press down firmly to “snap” the table top onto the table base.
Note: This may require some force.
1
9
•Fit the connector cover onto the back of the table base,
as shown.
•Insert two screws into connector cover. Tighten the screws.
1
6
•Insert two screws through the table base into the leg. Tighten
the screws.
1
8
•Locate the connector coming from the table base.
•Insert and “snap” the connector into the socket on the
underside of the table top.
•Tuck the excess wire from the connector back down into the
opening in the table base.
Assembly is now complete.
Table Top
Connector
1
5
•Slide the table base onto the chair assembly, as shown.
Table Base
Socket
Connector Cover
Connector
Back View
Back View