Escali M-Series Scale User Manual


  Open as PDF
of 4
 
OPERATION
LEVEL THE SCALE
When the scale is put to use at a new place, adjust the level of the scale by turning the 4
level adjusting feet until the bubble is located in the middle position of the bubble leveler.
ACTIVATING THE SCALE
1. Turn on the “power on/off switch”
2. Turn the scale on by pressing “ON/OFF” key
2. The LCD screen will show all characters for a few seconds and then “0.000►” will be
shown on the display.
3. The scale turns off automatically after being idle for two minutes.
EL BACK LIGHT
Your can turn On or Off the Back light of the scale by pressing the “Back Light” key
WEIGHING AN ITEM
1. Turn on the scale.
2. Place an item on the platform and the exact weight of item will be displayed.
SELECTING WEIGHT UNIT
When the scale is power on, press the “MODE” key repeatedly to change weight unit
according to following sequence:
kg --- lb --- oz --- lb/oz
Displays 4 modes, e.g. “kg” mode F 1.500kg
“lb” mode F 3.32lb
“oz” mode F 52.9oz
”lb/oz mode F 3lb 4.9oz
USING THE HOLD FUNCTION
When the object is on the scale platform, press the “HOLD” key once and then take off the
object from the scale platform. the weight of the object will be hold for 1 minute with a
HOLD icon displays on the left side of the LCD.
USING THE TARE MODE:
1. Turn the scale on.
2. “0.000►” will be shown on the display after a few seconds.
3. Place an item on the weighing platform and read the value accordingly.
4. Press the “TARE” key, the weight of this item will be eliminated and the reading will
change to “0.000►”.
5. Place next item on the weighing platform and get the reading.
6.
Press “TARE” key again will show the total weight
7.
Repeat step (4) to (6) for further objects.
Note: The scale will display a negative reading when you remove all items. Press the
“Tare” key once and the negative reading will disappear.
 previous