Escali C3315 Scale User Manual


 
5
5. Take off the first samples and put the second samples (e.g. 30 pcs) on the scale
platform.
6. Press M+” key.
7. The UNIT WEIGHT” display will show followed by .
8. Repeat the procedures until all the samples are counted.
9. Press ZERO” key and “CE”, to clear the “WEIGHT” and “UNIT WEIGHT” display.
10. The total accumulated quantity will be displayed by pressing “M+” key.
11. Press MC” key to cancel the accumulated quantity.
WEIGHT ACCUMULATING
1. When the “UNIT WEIGHT” display shows 0, place samples on the scale platform.
2. Press M+” key. The weight will be stored.
3. Take off the first samples from the scale and put the second samples on the scale
platform.
4. Repeat procedure (2) until all the samples are weighted.
5. To recall the accumulated weight, press “M+” key when “WEIGHT” and “UNIT
WEIGHT” display show “0”.
6. Cancel the accumulated weight by pressing the “MC” key.
SELECTING WEIGHT UNIT
When the scale is power on, press the “KG/LB” key repeatedly to change weight unit
according to following sequence:
kg --- g --- lb
Displays 3 modes, e.g. “kg” mode F 1.500kg
g mode F 1500g
“lb” mode F 3.32lb