Filter
Top Products
• Whilst holding these firmly in position, place the plastic base on the end.
Ensure the orientation markers on the spotlight battery compartment and
the plastic base are aligned – See Figure 3.
• Screw the plastic base onto the spotlight battery compartment,
ensuring that the orientation markers re-align when finished.
• Insert the manual precision tweezers back into the epilator.
Spotlight battery replacement continued
10
Care and Cleaning
• Switch the epilator off after use. Always turn the power off and remove the
plug before cleaning.
• Do not immerse the appliance in water or any other liquid.
• To clean the exterior, simply wipe over with a dampened cloth and wipe
dry.
• After each use remove the epilation cover by pressing the head release
button. Then brush away any hairs using the brush supplied. Replace the
epilation head before use.
• Occasionally clean the tweezers by wiping with a cotton bud that has been
dipped in alcohol. Remove any residue alcohol before using again.
• Keep the protective cover on the appliance when not in use.
Fig 1
Fig 2
Fig 3
Insert this
end first
Spotlight battery
compartment
Orientation markers
Tweezer arms
Plastic base
Locating tabs
Tweezer arm base