Filter
Top Products
Emerson Process Management Manufacturing GmbH & Co. OHGP-2
CAT
Instruction Manual
HAS9xE-IM-ATEX
07/2005
INTENDED USE STATEMENT
CAT series gas analyzers are intended to be used as analyzers for industrial purposes. They must
not be used in medical, diagnostic or life support applications, and no independent agency
certifications or approvals are to be implied as covering such applications!
SAFETY SUMMARY
If this equipment is used in a manner not specified in these instructions, protective systems may be
impaired.
AUTHORIZED PERSONNEL
To avoid explosions, loss of life, personal injury and damage to this equipment and on-site property,
do not install, operate or service this instrument before reading and understanding this instruction
manual and receiving appropriate training. Save these instructions.
Safety Instructions
SAFETY INSTRUCTIONS
ADDITIONAL LITERATURE
This manual covers aspects specific for using CAT analyzers in hazardous
(classified) areas, only.
To install, start-up, operate and maintain/service the instrument in a safe
manner it is MANDATORY to read all additional instruction manuals shipped
together with the instrument!
The following instruction manuals are available and/or referenced within this manual at hand:
CAT 100:
HAS1xE-IM-HS Instruction manual BINOS 100 series
CAT 200:
HAS3xE-IM-HW Hardware instruction manual NGA MLT series
HAS3xE-IM-SW39 Instruction NGA MLT software V 3.9.x
(Software instruction manual depends on currently installed analyzer softwareof
the internal NGA MLT module)
Contact your local service center or sales office when missing documents. Save all instructions for
future use!