E&J EJ78X-1 Wheelchair User Manual


 
EJ78X-1-INS-LAB-RevA10 13
Store Transport Chair in car's back seat
1. Move the car's front seat as far forward as possible.
2. Holding the folded Transport Chair by the carrying straps, lift it into the car and place it on
the back seat oorboard. Stow the footrests alongside. DO NOT put any articles on top of
the Transport Chair.
Ensure the Transport Chair is stable, will not shift while the car is in motion, and does not
block the driver's eld of vision.
Store Transport Chair in car's trunk
1. Holding the folded Transport Chair by the carrying straps, lift it and carefully place it in the
trunk. Stow the footrests alongside.
2. DO NOT put any articles on top of the Transport Chair. Close the trunk lid slowly.
Unfold the Transport Chair (see picture on previous page)
1. Push down on the seat rails until the seat is completely open.
2. Unfold the back: Raise upper back until it locks into place; ensure that upper back is locked
into place before proceeding.
3. Install footrests.
WARNING: Ensure Transport Chair is unfolded as instructed and that upper back is locked into
place, seat is completely open, and footrests are locked in place before occupying or operating
Transport Chair.