Filter
Top Products
GF0500090RevB07 • EJ777-1 Transport Chair 17
6 TRANSPORTING THE EJ777-1 TRANSPORT CHAIR
PREPARING THE EJ777-1 FOR TRANSPORT
WARNING: This transport chair does not offer seating or occupant restraint equiva-
lent to the seat provided in a motor vehicle! To increase your safety while
traveling in a motor vehicle, always transfer to the vehicle seat and use
the restraint provided by the vehicle manufacturer.
When transporting the transport chair in a motor vehicle, do not place the transport
chair where it will interfere with the safe operation of the vehicle or endanger the
driver or passengers. The front seat is not a good location to store a transport chair
during transport, as the transport chair can be dislodged and become a serious haz-
ard to the vehicle driver. Always take precautions to avoid personal injury when load-
ing or lifting a transport chair into or out of a vehicle. The transport chair can easily
be transported in the rear seat or the trunk.
Fold the transport chair (see picture below)
seat upholstery
center front
footrest
upper back
hand grip
push handle /
upper back post
upper back
release lever
upper back
release pin
1. Detach footrests from transport chair.
2. Fold down upper back: Press the upper back release levers toward the upper back
posts. This will free the upper back release pins. Rotate the push handles down-
ward.
3. Fold the transport chair: pull up sharply on the seat upholstery at front and rear
center at the same time. Tip the transport chair sideways so the opposite wheel
won't drag and press sides together.