Filter
Top Products
3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual 9
4 HANDLING TIPS
The Everest & Jennings
®
Traveler SE has been designed and engineered
to perform as a stable and well balanced unit when used for its intended
purpose. However, it is possible to tip the Traveler SE over if it is used
improperly. We urge you to learn the characteristics of your wheelchair.
It is most important to learn safe methods to perform the daily activities
basic to your lifestyle. Consult your medical professionals for assistance
in developing the skills and proper techniques to perform all activities
safely.
BALANCE
Proper balance is the key to maintaining the stability of your wheelchair.
Reaching, bending, and transferring to or from a wheelchair will change
the weight distribution and center of gravity of you and your wheelchair.
When performing such activities, do so as instructed in the following
paragraphs to avoid tipping the wheelchair.
TRANSFER ACTIVITIES
WARNING: Always ensure that the wheelchair is on a stable,
level surface and engage wheel locks before transfer.
WARNING: Do not step on the footplates; this could cause the
wheelchair to tip. Fold them up, and either detach them, or
swing them aside.
WARNING: There is a critical moment when there is little or no
seat platform beneath you. Take every precaution to reduce this
unsupported distance before you attempt transfer.
Transferring into or out of a wheelchair is a very difficult maneuver. Exer-
cise extreme care when transferring without the aid of either an atten-
dant or a patient lift. Consult your physician, nurse, or physical therapist
for assistance in developing your individual technique. Make sure that
the wheelchair is stabilized, and will not move or slide during the trans-
fer. Take extra precaution to prevent tipping. Use good body mechanics to
prevent personal injury.