Echo HCA-260 Hair Clippers User Manual


 
S
HAFT
H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
17
EQUIPMENT CHECK
Before operation a complete check of the unit must be performed;
Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
Check that the blade assembly is firmly attached and in safe operating
condition. Dull, loose or damaged blades should not be used.
Tighten the Blade angle adjustment lever before operating.
Check that shoulder harness is adjusted for safe, comfortable
operation.
DETERMINE OPERATION AREA
Review the area to be trimmed. Look for hazards that could contrib-
ute to unsafe conditions. DO NOT operate unit if any wires (power,
telephone, cable, etc.) are closer than 4.5 M (15 ft.) to any part of the
operator or unit.
Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than15 M (50 ft.)while the
trimmer is in use.