Filter
Top Products
GETTING STARTED GETTING STARTED
CHARGING THE BATTERIES
Keep the charging stand plugged in continuously. And for optimum
performance you should place the power handle back into the
charging stand after every use. You cannot overcharge the batteries.
To extend battery life, unplug the charging stand for a couple of days
every other month. Plug the charging stand back in after the handle
runs out of power.
Batteries should last three to five years depending on how frequently
you use the product.
BATTERY DISPOSAL
We use a nickel-metal hydride rechargeable battery. Please do not
dispose of this appliance in the household waste basket. Instead,
dispose at a recycling center.
CLEANING THE SYSTEM
After every use, rinse and clean any toothpaste or residue from
the attachments and the ergonomic power handle. Take off the
attachments and rinse parts separately, then wipe them dry.
FREE REPLACEMENT BRUSH HEADS
We recommend replacing the brushing attachments
every three months. You will receive FREE
replacement brushes by calling our toll-free number
at 1-800-774-7525 (a small S&H fee will
be charged).
4
Cybersonic3
®
is as easy to use as it is to maintain. Please follow these
simple instructions to get started and to ensure that your system works
properly and effectively for years to come. If this is your first time using
a power toothbrush, you’ll notice a little tingling “tickle” sensation. This
is normal and minimizes after continued use.
1. Charge The Power Handle 24 Hours.
Before using your system for the first time, it is very important to charge
the power handle (for at least 24 hours before for the first use). Failure
to do so could damage the battery system.
• Plug charger into outlet
• Place power handle into the stand, the charging indicator will illuminate
• Charging stand and power handle may warm slightly
After the initial charging period, you may begin using your
Cybersonic3
®
system.
2. Install or Remove Attachment.
Select a cleaning attachment. Push onto the end of the power
handle until you hear a click. For optimum results, the face of the brush
or cleaning attachment should be on the same side as the ON/OFF
button. However, you may orient the attachment position anyway you
feel comfortable. Do not try to pull the attachment straight off. To
remove, push the attachment to the side while pulling at the same time.
3. Power On.
Locate the push button on the side of the ergonomic power handle.
Push this button to power on and again to power off when you're
finished cleaning. The power turns off automatically when the power
handle is placed into the charging stand. The handle is designed so you
can use it anyway that feels comfortable in your hand.
Push Sideways for
Removal
Power Button
5