Note: User should ensure proper mode is selected before attempting to drive or operate
actuator.
Locking the SHARK
Some SHARKS may be supplied factory programmed with a LOCK feature that
prevents unauthorised people from turning SHARK on.
To LOCK Shark
• While the power is ON, press and hold the POWER button for 2 seconds
• The display will turn off immediately
• After 2 seconds all LED’s will flash briefly and the horn will sound a short
beep.
• The powerchair will then turn off.
To UNLOCK Shark
• While SHARK is locked, press the power button to turn shark ON.
• All LED’s will flash briefly. The LED’s will then perform a slow right to left
countdown.
• Press the HORN button twice before the countdown is completed (approx 10
seconds)
• The current state of charge will be displayed and SHARK may be operated
normally.