Filter
Top Products
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety pre-
cautions should always be followed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER
DANGER -
Any appliance is electrically
live even when the switch is off. To reduce
the risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or
other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING - To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left unat-
tended when plugged in.
2. Do not pull, twist, or wrap line cord around
appliance.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
4. Use this appliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by the
manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or dam-
aged, or dropped into water. Return the
appliance to an authorized service center for
examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening.
9. Do not use outdoors or operate where aero-
sol (spray) products are being used or where
oxygen is being administered.
10. Unit is hot when in use. Do not let heated
surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the appli-
ance or place on a soft surface such as a
bed or couch, where the air openings may be
blocked. Keep the air opening free of lint and
other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the appliance.
Use handles or knobs.
15. Before plugging in, read the information
about dual voltage contained in the instruction
section of this manual.
16. Do not attempt to touch the housing of your
appliance near the straightening plates, as it is
hot when in use.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron is intended for house-
hold use. Use on Alternating Current (50/60
hertz) only. This unit is designed to be oper-
ated at 120/240 volts A/C.
DUAL VOLTAGE
This straightening iron will automatically
adjust to the proper voltage. Use an adapter
plug with correct configuration, prior to use
in outlet.
TO STRAIGHTEN HAIR
Hair should be clean and completely dried
before using the straightening iron. For best
results, use a light styling product before blow-
drying hair. Plug the iron into an electrical
outlet. Turn on unit. The power indicator light
should become illuminated. Allow unit to heat
up for several minutes.
To turn off, press Power On/Off button (light
will go off).
Never leave your straightener on and unat-
tended. However, should you fail to turn the
straightener off, it will shut itself off auto-
matically within 60 minutes.
WARNING: The straightening iron's ceramic-
coated plates will get very hot within a few
seconds and should not be placed in contact
with the skin after the straightening iron has
been turned on.
GETTING STARTED
The iron’s 25 temperature settings and
Instant Heat technology provide styling
versatility for all hair types. If you have fine
hair, a low temperature will provide the best
results. If you have thick, wavy or hard-to-
straighten hair, keep the heat setting on
high. You can vary the iron’s temperature
according to your particular need!
REMOVABLE COMB
Your straightening iron includes a removable
comb attachment. The comb will help to pro-
vide tension and guide your hair as you use
the straightening iron. Be sure to turn iron off
and allow it to cool before removing or attach-
ing the comb. To remove it, hold the iron firmly
with one hand; with your other hand, slide
comb away from the iron. When replacing the
comb, align the comb with the slot on the side
of the iron and slide comb into position. Make
sure the comb locks securely into position.
STYLING WITH THE NEW SATIN FINISH
®
EASY-GLIDE
CERAMIC-COATED PLATES
The plates of your new straightening iron
have a Satin Finish
®
Easy-Glide ceramic-
coated surface, the newest technology. This
means your hair will glide easily over the
surface of the plates as you’re straightening.
The ceramic-coated surface helps smooth
down flyaways and frizzies. It evenly distrib-
utes heat so that the style you create has a
salon-perfect, silky smooth, shining finish.
Hair also slips right through the plates after
it’s straightened. Styling product residue is
simple to clean off ceramic-coated plates.
The new ceramic technology is a pleasure
to work with and makes styling your hair
easier and the results more professional.
USING INSTANT HEAT, THE 25 VARIABLE
TEMPERATURE SETTINGS AND
UNIFORM HEAT RECOVERY SYSTEM
This styling iron features Conair’s Instant Heat
technology. This Instant Heat technology has
25 variable temperature settings. Every type
of hair, from the finest to the curliest and
most resistant, has a temperature range
that’s gentle and safe for it and helps you
create the look you want. And that’s not
all. Conair’s professional salon standards of
engineering provide you with a Uniform Heat
Recovery System that maintains the iron at
constant temperatures. There is a constant
flow of power to ensure that heat is con-
tinuously delivered for optimal styling results,
unlike other units which lose heat during use.
This provides consistent styling power so
that every strand of your hair is set with the
same level of heat and comes out the same
way for a perfect finish.
Temperature Setting Guide
TEMP. CONTROL HAIR TYPE
Low 1-8 Delicate, thin, easy-to-straighten
Medium 9-14 Average to thick or treated hair
Med-High 15-20 Thick or wavy hair
High 21-25 Hard-to-straighten hair
Turbo Heat
™
Up to 20°C/68°F burst of heat
for difficult styling spots
Start with a hair section that is 2" wide and
no more than 1/2" thick. Open the iron and
place a hair section between the two hot
plates, close to the scalp. Trap hair between
the plates by firmly squeezing the handles
together. While maintaining the tension,
slowly pull the unit down along the hair
section toward the end of hair. At the end
of hair section, release the pressure on the
handle and allow the hair section to slide
out. Repeat process on additional sections
of hair until you achieve the hair style you
desire. It may be necessary to repeat pro-
cess on certain areas, depending on the
texture of your hair.
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
For faster styling results, we have added a
unique optional Turbo Heat on/off feature.
Press the Turbo button to deliver up to
20°C/68°F more heat in the highest setting,
for maximum styling performance.
06PC2050 CS19JCS IB.indd 106PC2050 CS19JCS IB.indd 1 2/21/07 2:28:03 PM2/21/07 2:28:03 PM