Filter
Top Products
SAVE THESE
INSTRUCTIONS
TROUBLESHOOTING
There are several things to look for if your trimmer fails
to operate:
1. Be sure the trimmer is turned ON.
2. Make sure that the battery is properly placed in the battery
compartment. Test the battery to be sure it is working.
3. Check the blades to see if they are clogged with hair
clippings; if so, use a cleaning brush to remove hair.
4. If the trimmer still fails to operate, take or send it to
a Conair Service Center (see warranty procedure and
addresses).
FOR HOUSEHOLD USE ONLY
OPERATING
INSTRUCTIONS
1. Remove the battery cover at the back of
the unit by pulling straight down.
2. Being careful not to bend the clips, insert
the negative end of the battery first, so it will
slip easily into position.
3. Return the battery cover to its original
position by pushing it into place.
4. To use your trimmer, push ON/OFF switch
upwards to ON position.
5. After you finish using your trimmer, push down on the
ON/OFF switch to turn the trimmer off.
6. Always purchase the correct size and grade of battery
most suitable for the intended use.
7. Replace the battery once it is no longer functional.
8. Clean the battery contacts and also those of the devise
prior to battery installation.
9. Ensure the batteries are installed correctly with regard
to polarity (+ and -).
10. Remove batteries from equipment, which is not to be
used for an extended period of time.
11. Remove used batteries promptly.
12. Store unused batteries in their original packaging,
away from metal objects that could short-circuit them.
Never short-circuit batteries.
13. Never dispose of batteries in fire, except under
conditions of controlled incineration. Failure to observe
this precaution may result in an explosion. Never attempt
to recharge primary batteries as this may cause leakage,
fire, or explosion.
*The BT2 requires 1 “AA” battery (not included).
We recommend using alkaline batteries in your trimmer
because they last longer. If you are not going to use
your trimmer for a long period of time, or if the battery is
dead, remove the battery from the unit. This will increase
the life of your trimmer.
OUTLINING
Women whose skin is sensitive to cosmetics, easily
irritated by trimming or who suffer from a skin allergy
should test one section of leg or arm before using.
1. The bikini trimmer is especially useful for providing
shape and definition. It is best to begin with clean
slightly damp hair.
2. Beginning at the sides, use the cutting blades to
define the shape.
3. If you would like to shorten your hair, run the blades
over your hair until the desired length is achieved using
even strokes.
TAKING CARE OF YOUR TRIMMER
BLADE CARE
Because the trimmer blades are precision made for a
very special use, they should always be handled with care.
Each time you finish using the trimmer, take a cleaning
brush and brush away any loose hair that has collected
in the blades.
TO CLEAN YOUR TRIMMER
Make sure trimmer is off.
1. To remove the trimmer head for cleaning,
turn the head counter-clockwise until the “I”
mark aligns with the “arrow” mark, then lift
the head gently (Fig. 1).
2. Only rinse the head under water (Fig. 2).
For proper functioning of the unit, the handle
can not touch or be immersed in water.
3. After cleaning, make sure to shake dry the
head before replacing it to the body.
4. To reassemble the head onto the body,
align the “I” mark on the head with the
“arrow” mark on the body and then turn
clockwise until the “I” mark aligns with the
“circle” mark on the body (Fig.3).
BT2GBR
BIKINI
TRIMMER
Trimmer Head
On/Off Switch
Battery Compartment
Model BT2GBR
®
Instruction
Booklet
For your safety and
continued enjoyment
of this product, always
read the instruction
booklet carefully
before using.
Bikini
Precision
Trimmer
&
ShAver
(Fig. 1)
(Fig. 3)
(Fig. 2)
WARRANTY
This warranty does not cover the following items that
are the Consumer’s responsibility: Damages to the
product, or its accessories as consequence of
inadequate use, handling, incorrect use, lack of skills,
and transport not carried out by the Reseller/Importer.
Damages to the product caused by its use for
purposes other than those specified by the
manufacturer and/or importer, or not compatible with
its purpose. This warranty also excludes interventions
inherent to the installation and power feeding of the
appliance, the use of incorrect voltage, as well as
maintenance operations mentioned in the instructions
manual. The warranty does not cover the wear due to
the normal use of the appliance.
SERVICE CENTERS
The repairs covered by this warranty must only be
carried out in Authorized Assistance Workshops, duly
appointed by the manufacturer and/or importer, who,
for this purpose will employ specialized technicians
and original parts. During the (12) twelve month
warranty period, if the appliance is repaired in a
Technical Assistance Center appointed by the
Reseller/Importer, the transport risks will be covered
by the Customer, whether he delivers it directly or by
the Technical Assistance Center, whether it offers
transportation services. The Authorized technicians
that operate in the region will make the interventions
at the customer’s request, within the time limits of
the operational requirements.
Authorized Service Center: NS Service
Telephone - 0800 770 8575
www.NSservice.com.br
WARRANTY EXPIRATION
Do not rely on not authorized, not qualified workshops
or persons other than those appointed by the
manufacturer and/ or importer of the product
identified below for its repair. This appliance is
intended for household use only. Its use for industrial,
commercial or other than as a household appliance
will imply in the immediate ceasing of the warranty
coverage.
Series number:
Purchase date:
Store Name and Stamp:
Model BT2GBR