Filter
Top Products
English
- Eng 9 -
AUTO POWER OFF FUNCTION
If this unit is left unattended for about 1 minute, it will
automatically power down from the current mode and enter
the stand-by mode, showing room temperature, time, and
date. The display alternates between time and date in a
pattern that repeats every minute as follows: time 11 sec /
date 4 sec / time 11 sec / date 4 sec / time 30 sec.
BATTERY REPLACEMENT
1. Replace the battery when the display behaves as follows:
The stand-by mode shows NOTHING on the display except
the time and date. When the ON/MEM button is pressed,
NOTHING is displayed except the battery mark blinking 12
times followed by OFF for 1 second and then the display
returns to NOTHING except the time and date.
s
s
ON/MEM
s
s
2. Insert a pointed object such as a pen
into the battery cover access hole
(Fig.13) while using your thumb to push
the battery cover out.
Fig.13
3. Hold the device and pry the battery out
with a small screwdriver (Fig.14).
Fig.14
4. Insert a new battery (CR2032) under the metal hook and
press down on the battery until you hear a click. The positive
(+) side should be up and the negative (-) side should be
down.
5. Replace the battery cover.