Citizen REF CH-437C Blood Pressure Monitor User Manual


 
- Eng 21 -
English
When your pulse is detected, the mark will blink
and pressure will be shown in the Diastolic Blood
Pressure readout. (Diastolic blood pressure is the
lower number of your two blood pressure readings).
After the measurement has been taken and recorded,
the air inside the arm cuff will be released and the
measurement results (Systolic/Diastolic blood pressure
and pulse rate) will appear.
* When the measurement is completed, the
measurement results will be stored in the memory in
the monitor unit, automatically.
The starting pressure setting used is based on the last measurement taken.
If you share the blood pressure monitor with other people and measure your
blood pressure using the Automatic Pressurizing mode after a person with
higher blood pressure, the starting pressure setting may be unnecessarily high.
Therefore, use the Manual Pressurizing mode if you share the blood pressure
monitor with other people.
NOTICE!
HOW TO MEASURE YOUR BLOOD PRESSURE