Citizen PHS 50 Scale User Manual


  Open as PDF
of 4
 
3
TARE WEIGHING
Turn on scale as described above
Place the “tare item” on the platform
Press “ON/OFF” and wait until “0.00” is displayed
Add the “net-weight-item”
CALIBRATION
Press “TARE” key until displays some digits on LCD after showing “8” one by one. It shows some
digits on LCD. Press “TARE” key to calibrate zero point and show “0.00”. Put 50g weight (half
capacity) on the platform. Press “TARE” and display “50.00”(half capacity) afterwards. Put away
50g weight and put 100g weight (full capacity) on the platform. Press “TARE” and display “100.00”.
Press “TARE” not release until switch off. Put away the weight. The calibration is completed.
PLEASE CHECK AVAILABILITY OF WEIGHTS WITH THE STORE YOU BOUGHT THE SCALE
FROM.
 previous