Filter
Top Products
Page 3SKU 40765 For technical questions, please call 1-800-444-3353.
KEEP WORK AREA CLEAN. Cluttered areas invite injuries.1.
OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit 2.
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered
equipmentinthepresenceofammablegasesorliquids.
KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let 3.
them handle machines, tools, or equipment.
STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location 4.
to inhibit rust. Always lock up tools and keep out of reach of children.
DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for 5.
which it was intended. Do not use inappropriate attachments in an attempt to exceed
the tool’s capacities.
USE THE RIGHT TOOL FOR THE JOB. Do not use a tool for a purpose for which it was 6.
not intended.
DRESS PROPERLY7. Do not wear loose clothing or jewelry, as they can be caught in
moving parts. Non-skid footwear is recommended. Wear restrictive hair covering to
contain long hair. Always wear appropriate work clothing.
USE EYE, EAR8. AND BREATHING PROTECTION. Always wear ANSI approved impact
safetygogglesifyouareproducingmetallingsorwoodchips.WearanANSIapproved
dust mask or respirator when working around metal, wood, and chemical dusts and
mists. Use ANSI approved ear protection when working in a loud or noisy environment.
DO NOT ABUSE THE POWER CORD. Protect the power cord from damage, either 9.
from impacts, pulling or corrosive materials. Do not yank machine’s cord to disconnect it
from the receptacle.
DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach 10.
over or across running machines.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer 11.
performance. Follow instructions for lubricating and changing accessories. Inspect
power cord periodically and, if damaged, have it repaired by an authorized technician.
Inspect all moving parts and mounting bolts prior to use. Control handle and power
switch must be kept clean, dry, and free from oil and grease at all times.
REMOVE ADJUSTING KEYS AND WRENCHES. Be sure that keys and adjusting 12.
wrenches are removed from the tool or machine work surface before operation.
AVOID UNINTENTIONAL STARTING. Be sure that you are prepared to begin work be-13.
fore turning the start switch on.
STAY ALERT. Watch what you are doing. Do not operate this machine when you are 14.
tired.