Chauvet RVM Wheelchair User Manual


 
Page 12 of 24 Scorpion™ RVM/RGY/GVC User Manual (Rev. 01e)
Mounting
Orientation
The Scorpion RVM/RGY/GVC may be mounted in any position, provided there is adequate
room for ventilation.
Rigging
Be sure that the structure onto which you are mounting this product can support its weight.
Please see the “Technical Specifications” section of this manual for weight information.
Mount the fixture securely. You can do this with a screw, a nut, and a bolt. You could also use a
mounting clamp if rigging this product onto a truss. The bracket has a 13 mm in diameter, which
is appropriate for this purpose.
When mounting this product overhead, always use a safety cable.
Always consider ease of access to the unit for maintenance and programming purposes before
deciding on a location for this product
When power linking multiple fixtures, always consider the length of the power linking cable and
mount the fixtures close enough from each other to accommodate for this.
The bracket knobs allow for directional adjustment when aiming the fixture to the desired angle.
Do not use tools to loose or tighten the bracket knobs. Doing otherwise could damage the
knobs.
Mounting Diagram
Hanging Bracket
Bracket Adjustment
Knob (1 of 2)
Rubber Feet (1 of 4)