Filter
Top Products
TRoUbleshooTInG GUIDe
ISSUE
Motor sounds occur
during operation.
The unit stops
during operation.
The unit does not start.
POSSIBLE CAUSE/RESOLUTION
These sounds are normal and
not a machine malfunction.
The 20-minute auto shutoff is engaged.
The thermal resetting protection device
is engaged. This is an added safety feature
to protect the unit from overheating. If the
unit stops and fails to restart as a result of
overheating, turn the main power off and do
not operate the unit for at least 30 minutes.
Failure to turn off the unit may cause it to resume
operation unexpectedly when the device is cooled.
The Main Power Switch or the Power Button on
the Control Panel was pressed accidentally.
Determine if the AC power has been
turned off.
Ensure the Power Cord is
connected to the electrical outlet.
12