Braun ST 750 Hair Clippers User Manual


 
8
English
Please read these use instructions carefully before use and
keep them for future reference.
Important
Plug your appliance into an alternating current outlet only
and make sure that your household voltage corresponds
to the voltage printed on the appliance.
This appliance must never be used near water (e.g. a
filled wash basin, bathtub or shower). Do not allow the
appliance to get wet.
For additional protection, it is advisable to install a residual
current device (RCD) with a rated residual operating
current not exceeding 30 mA in the electrical circuit of
your bathroom. Ask your installer for advice.
This appliance is not intended for use by children or
persons with reduced physical, sensory or mental
capabilities, unless they are given supervision by a person
responsible for their safety. In general, we recommend that
you keep the appliance out of reach of children. Children
should be supervised to ensure that they do not play with
the appliance.
Avoid touching the hot parts of the appliance.
When hot, do not place on surfaces that are not heat-
resistant.
Do not wrap the mains cord around the appliance.
Regularly check the mains cord for wear or damage. If the
cord is damaged, stop using the appliance and take it to
an authorized Braun Service Centre. Unqualified repair
work can lead to extreme hazards for the user.
The appliance should be used on dry hair only.
Be careful when using the appliance at maximum Be careful when using the appliance at maximum
temperature.temperature.
Description
1 Cool touch
2 Display
3 Hair type selector («–/+»)
4 «boost» button
5 on/off button
6 Swivel cord (2 m length)
7 Ion jets
8 NanoGlide Ceramic plates
Colour Saver Technology
Colour Saver Technology with satin ions maintains the
precious health of colored hair as it protects your hair from
dry out and damage and prevents moisture loss of coloured
hair by up to 50%* while styling. As satin ions are released
onto your hair a slight crackling noise can be heard.
For beautiful smooth and sleek hair that looks more healthy
and radiantly vibrant for longer.
* compared to usage of an appliance without Colour Saver
Technology
Getting started
Connect the appliance to an electrical outlet and push the
on/off button (5) for 1 second to turn it on.
During heat up, the display turns orange/red. The appli-
ance is delivered with a default setting for normal hair,
medium. The thermometer symbol is flashing [A] as long
as the temperature for the displayed setting is not
reached.
After approx. 30 seconds, the display turns green to
indicate that you can start using the appliance. As soon
99571424_ST750_China.indd 899571424_ST750_China.indd 8 19.05.2010 13:48:42 Uhr19.05.2010 13:48:42 Uhr