Filter
Top Products
Page 3
Lift Terminology
Introduction:
Braun L955 Millennium Series
lifts are consumer oriented
(designed to allow operation by
the wheelchair passenger). L955
lift models provide fully automatic
operation of all lift functions as
well as optional automatic door
operators (if so equipped).
The L955 Millennium Lift Series
includes variations of L955SE
and L955U lift models. Lift model
numbers indicate platform/roll
stop configuration and physical
dimensions. A standard L955SE
lift model is depicted in the Lift
Terminology Illustration. The
bridge plate extension is bolted to
the bridge plate (as shipped). In
stepwell applications where
additional platform length is
required, the extension plate may
be bolted to the heel (inboard
end) of the platform.
Lift operation procedures are
identical for all L955 Series lift
models. The operating Instruc-
tions contained in this manual
and appearing on lift-posted
operating instructions decals
address the lift control switches
and the corresponding lift func-
tions. Instructions are provided
for manual operation of the lift in
event of power or equipment
failure.
Terminology: Become familiar
with the terminology that will be
used throughout this manual.
Become familiar with the identifi-
cation of lift components and their
functions. Contact your lift sales
representative or call The Braun
Corporation at 1-800-THE LIFT if
any of this information is not fully
understood.
Direction: The terms "left (rear),"
"right (front)," "inboard," and
"outboard" will be used through-
out this manual to indicate
direction (as viewed from outside
the vehicle looking directly at the
lift). Refer to the Lift Terminology
Illustration for clarification of
direction terms.
Lift Components
Refer to the Lift Terminology
Illustration for identification of lift
components.
Pump Module: The lift-mounted