Filter
Top Products
9
Care and cleaning
The probe tip is the most delicate part of the
thermometer. It has to be clean and intact to ensure
accurate readings.
If the thermometer is ever accidentally used without
a lens filter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or
soft cloth moistened with alcohol. After the alcohol
has completely dried out, you can put a new lens
filter on and measure. If the probe tip is damaged,
contact Braun.
Use a soft, dry cloth to clean the thermometer display
and exterior. Do not use abrasive cleaners. Never
submerge this thermometer in water or any other
liquid.
Store thermometer and lens filters in a dry location
free from dust and contamination and away from
direct sunlight.
Additional lens filters (LF 40) are available at most
stores carrying Braun ThermoScan or at Braun
Service Centers.
6022435_IRT_Korea_S4-30 Seite 9 Donnerstag, 24. August 2006 2:30 14