Filter
Top Products
Follow these instructions carefully to insert or change the Braun
energy cell. Never insert or change it near an open fire or flame.
1 The switch must be set at
the «0» (= off) position.
2 Remove the end cap by
turning in the direction
of the arrow.
3 Insert the Braun energy
cell into the styler handle.
Important:
The arrows on
the energy cell indicate
which way it should be
inserted.
Push the cell firml
y up into
the styler handle. Replace
the end cap and turn it in
the opposite direction to
the arrow, which should
end in line with the dot.
Use only Braun energy cells which are specially designed for
your styler. They are available in two sizes (maxi = 25 ml and
mini = 12.5 ml) from the store where your Braun gas styler was
purchased, as well as from authorised Braun Service Agents.
The energy cells can be changed at any time, even if they are
only partly filled.
Before using
0
98826974_GCS70 UK Seite 2 Dienstag, 7. Oktober 2008 9:14 09