Filter
Top Products
4
Your SilkFinish comes with two trimming
combs in different lengths for trimming
eyebrows or hair in other body parts to a
uniform length: (7) long = 8 mm /
1
/
3
",
(6) short = 5 mm /
1
/
5
".
• Ensure that the appliance is turned off
before attaching a trimming comb.
• We recommend that you start with the long
trimming comb. Slide it over the regular
cutting head (2) until it clicks into place.
• Turn on the appliance and gently comb
your eyebrow or any other body hair to
be trimmed against the direction of hair
growth as shown in (c). Ensure that either
one of the comb sides is guided flat
against the skin.
Cleaning and maintenance
Always turn off the appliance before cleaning.
Clean the appliance after each use:
• Use the brush (9) to wipe away any hair or
dust.
• Alternatively, you can rinse the detached
cutting heads under warm running water.
A natural soap may also be used, provided
it contains no particles or abrasive sub-
stances. Rinse off all foam.
• Please ensure that the cutting head is
complete dry before attaching to the body.
• For storage, attach the protective cap (1).
Regularly check the cutting heads. If
damaged, please replace them.
Never use the appliance if the cutting head is
damaged or broken.
We recommend lubricating the cutter
element in the head with a drop of light
machine oil twice a year or after cleaning
with tap water.
Subject to change without notice.
This product conforms to the
EMC-Directive 89/336/EEC.
Please do not dispose of the product in
the household waste at the end of its
useful life. Disposal can take place at a
Braun Service Centre or at appropriate
collection points provided in your country.
Hrvatski
Molimo Vas da prije kori‰tenja aparata
paÏljivo i pomno proãitate uputstva za
upotrebu.
Upozorenje
DrÏite aparat dalje od dosega djece!
Prije kori‰tenja, isprobajte ga na manjoj
povr‰ini podlaktice. Ukoliko primjetite bilo
kakvu iritaciju ili alergijsku reakciju, presta-
nite koristiti aparat. Nikada nemojte koristiti
aparat na iritiranoj koÏi.
Opis
1 Za‰titna kapica
2 Standardna glava za ‰i‰anje
3 Prekidaã za ukljuãivanje / iskljuãivanje (I/0)
4 Poklopac odjeljka za baterije
5 Postolje
6 Kratki ãe‰alj za pod‰i‰avanje (5 mm)
7 Dugi ãe‰alj za pod‰i‰avanje (8 mm)
8 Glava za precizno ‰i‰anje
9 âetkica
5363437_FG1000_AMEE2 11.07.2006 11:16 Uhr S