Braun BS 8377 Electric Shaver User Manual


 
23
Thank you for purchasing Braun shaver.
Please be advised that depending on the
room temperature where you recharge and
store your shaver, the LED lamp may flash
even if the recharging indicator shows full
level. However, this has no issue with the
shaving performance.
For your comfortable use, we would like to
recommend 15-35 °C room temperature for
your recharging and storage of your shaver
as much as possible.
The shaver operating time may become
slightly shorter, if you charge, store and use
the product in colder temperature.
Warning
Your shaver is provided with a special cord
set, which has an integrated Safety Extra Low
Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is
risk of electric shock.
Description
1 Shaver foil
2 Cutter block
3 Foil release buttons
4 Long hair trimmer
5 Comfort setting switch «sensitive»
6 On/off switch
7 Shaver display
8 Replacement light for shaving parts
9 Reset button
10 Shaver power socket
11 Special cord set
12 Etui
Charging
The best environmental temperature for
charging is between 15 °C and 35 °C. Do not
expose the shaver to temperatures higher
than 50 °C for extended periods of time.
Using the special cord set (11), connect the
shaver to an electrical outlet with the motor
switched off and charge it for at least one
hour.
A full charge provides up to 45 minutes of
cordless shaving time. This may vary
according to your beard growth.
If the rechargeable battery has run out of
power (discharged), you may also shave by
connecting the shaver to an electrical outlet
via the special cord set.
Shaver display
The shaver display (7) shows the charge
status of the battery. During charging or
when using the shaver, the respective green
battery segment will blink. When fully
charged, all green segments will light up
continuously, provided the shaver is switched
on or connected to an electrical outlet.
The red low charge segment flashes when
the battery capacity has dropped below
20%, provided the shaver is switched on.
The remaining capacity will then be sufficient
for 2 to 3 shaves.
Shaving
Press the on/off switch (6) to operate the
shaver.
Comfort setting switch «sensitive» (5)
Setting the shaver head according to your
comfort needs.
The «sensitive» switch (5) provides three
options for comfort setting:
1 « + » :
The shaver head is in full swing, freely
follows the contours of your skin to
provide more comfort.
2 middle position:
The shaver head is semi-fixed for more
control.
3 « – » :
The shaver head is fixed for full control
and precise handling in hard to reach
areas.
English
5753429_Contour_8377/8374.indd 235753429_Contour_8377/8374.indd 23 20.02.2008 14:36:47 Uhr20.02.2008 14:36:47 Uhr