Filter
Top Products
16
Shaver display
The shaver display
z
shows the charge status
of the battery. During charging or when using the
shaver, the respective green charge status will
blink. When the battery is fully charged the green
charge status will light up continously, provided
the shaver is switched on or connected to an
electrical outlet.
Some minutes after completing the charging, the
shaver switches to the stand-by-mode:
The display turns off.
Low charge indicator
The red low charge indicator blinks to indicate
that the battery is running low, provided the
shaver is switched on. The remaining battery
capacity is suffi cient for 2 to 3 shaves.
Charging information
• A full charge will take about 1 hour and
provides up to 50 minutes of cordless shaving
time. This may vary according to your beard
growth and environmental temperature.
5-minute quick charge is suffi cient for a shave.
• Recommended ambient temperature for
charging is 5 °C to 35 °C. The battery may not
charge properly or at all under extreme low or
high temperatures. Recommended ambient
temperature for shaving is 15 °C to 35 °C. Do
not expose the shaver to temperatures higher
than 50 °C for extended periods of time.
Using the shaver
Personalizing your shaver
By holding down the accelerator button –/+
(
e
or
r
) you can adjust the shaving power to
your individual needs in the different areas of
your face from sensitive to intensive. The pilot
light in the start button (
w
) changes within the
following range:
(–) sensitive shave
- light blue
- dark blue
- green
(+) intensive shave
For a thorough and fast shave we recommend
the green (intensive) setting.
When switching on next time, the last used
setting will be activated.
1
0
0
8
0
6
0
4
0
2
0
1
0
0
8
0
6
0
4
0
2
0
96380503_760cc-7_MN_S4-130.indd 16 11.06.13 09:22