Filter
Top Products
8
The best environmental temperature for
charging is between 5 °C and 35 °C.
As a safety feature to avoid overheating, it
may happen that the charging lights flash
(red/green). After cooling down, the
appliance will continue charging with the
green charging light flashing.
Getting prepared for …
… dry usage
Your skin must be dry and free from grease
or cream.
Optional skin cooling: For the first few
epilations or if you have sensitive skin, you
can use the cooling application, recom-
mended by dermatologists to help reduce
possible skin irritation.
Ensure that the gel pack has been in the
deep freezer (***) for at least 2 hours (for
convenience you can store the gel packs in
the freezer).
Insert the gel pack underneath the glove‘s
transparent foil. Use only with glove.
Put transparent (cool) side of the glove on
your leg.
Start cooling for approx. 1/2 minute, longer
if needed.
Epilate the cooled skin area immediately.
Repeat cooling and epilating until
completion.
While epilating, please ensure your skin is
dry.
Important: Apply cooling glove to the same
area for no longer than 2 minutes. Keep away
from sunlight. Do not use gel pack when
damaged. Dispose of in household waste. Do
not use if you are hypersensitive, allergic to
the cold, or if your skin suffers from sensory
disturbances, when suffering from cardiac
diseases or arterial circulatory disorders.
•
•
•
•
•
•
•
•
•
… wet usage
The appliance can be used on wet skin, even
under running water. Make sure that the skin
is really moist in order to achieve optimum
gliding conditions for the appliance.
Additionally, you may apply some shower gel
to the moist skin for results that will leave
your skin beautifully soft and smooth after
wet epilation.
Before use, always make sure that the
epilation head is clean.
Always make sure that the epilation head
(2) is provided with a cap.
To change caps, press their lateral ribs and
pull off.
To change heads, press the release button
(6).
How to epilate
1 Turning on
Press one of the lock keys and turn the
switch clockwise to setting 2 (optimum
setting). For reduced speed, choose
setting 1 (soft setting).
The «smartlight» comes on instantly
and shines as long as the appliance is
switched on. It reproduces an almost
daylight condition, thus revealing even
the finest hair and giving you a better
control for improved epilation efficiency.
2 How to guide the appliance
Always stretch your skin when epilating.
Always make sure that the epilation area
between the massaging rollers is in
contact with your skin.
The pivoting caps automatically adapt to
the contour of your skin.
Guide the appliance in a slow, continu-
ous movement without pressure against
•
•
•
•
•
•
•
•
•
•
98650766_SE_7381_IBERIA.indd 898650766_SE_7381_IBERIA.indd 8 15.08.2008 10:44:47 Uhr15.08.2008 10:44:47 Uhr