Braun 5416 Electric Shaver User Manual


 
8
English
Our products are designed to meet the highest
standards of quality, functionality and design. We
hope you entirely enjoy your new Braun shaver.
Caution
Do not use the shaver near, or over, basins filled with
water (e. g. bath tubs, showers etc.).
For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1 Foil protection cap
2 Triple shaving frame
3 Duo cutter block
4 Pop-out long hair trimmer
5 Switch lock
6 On/off switch
7 Charging light (green)
8 Low-charge light (red) (only 5416/5415)
9 Shaver socket
j Switch for locking the swivel head («head lock»)
and for activating the pop-out long hair trimmer
(«trimmer»)
q Release button
2 Charging the shaver
For the 3 first chargings: Connect the shaver to the
mains and charge it for at least 4 hours (switch
position «off»), then shave without the cord until the
red low-charge light lights up.
(Model 5414: Shave without the cord until the shaver
runs distinctly slower.)
The full capacity is only reached after several
charge/discharge cycles.
Subsequent charges will take approximately 1 hour.
Wattage: 5 Watts
Voltage range during charging: 12–240 V Q /
50 or 60 Hz (automatic adaption)
Best environmental temperature range for charging:
15 °C to 35 °C
off on
lock
+35°C
+15°C
5476097_4_bis_78 Seite 8 Dienstag, 14. Oktober 2003 10:33 10