Filter
Top Products
8
This appliance is designed for household use only.
Description
1 Foil & Cutter cassette
2 Long hair trimmer
3 Precision setting switch
(360s only)
4 On/off switch
5 Charging lights (green)
6 Low-charge light (red)
7 Replacement light for shaving parts
8 Shaver power socket
9 Special cord set
10 Protective Cap
Charging
Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for shaving is 60 °F
to 95 °F / 15 °C to 35 °C.
Do not expose the shaver to temperatures higher than 122 °F / 50 °C for
extended periods of time.
• Using the special cord set (9), connect the shaver to an electrical outlet with
the motor switched off. When charging for the first time or when the shaver
is not used for a few months, leave the shaver to charge continuously for
4 hours.
• Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
• A full charge provides up to 45 minutes of cordless shaving time depending
on your beard growth. However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by
connecting the shaver to an electrical outlet via the special cord set.
• 5-minute quick charge is sufficient for a shave.
Charging lights
The green charging lights (5) show the charge status of the batteries
(330s/320s: 1 charging light). The green charging light blinks when the
shaver is being charged or switched on. When the battery is fully charged,
all green charging lights (330s/320s: 1 charging light) shine permanently,
provided the shaver is connected to an electrical outlet.
96303419_360_NA_S6-36.indd 896303419_360_NA_S6-36.indd 8 14.03.13 16:0314.03.13 16:03