Filter
Top Products
6
Description
1 Foil protection cap
2 Shaver foil
3 Cutter block
4 Release buttons
5 Long hair trimmer
6 Switch
7 Charging lights (green)
8 Low charge light (red)
9 Replacement light for shaving parts
10 Reset button
11 Pilot light
12 Shaver socket
13 Special cord set
Charging the shaver
• When charging for the first time: Using the special cord
set, connect the shaver to an electrical outlet.
The shaver must be switched off. Charge it for at least
4 hours (special cord set and shaver might get warm).
Once the shaver is completely charged, shave until
fully discharged. Then recharge to full capacity again
(1 hour).
• A full charge will give up to 50 minutes of cordless
shaving time, depending on your beard growth.
However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
• Best environmental temperature range for charging is
from 60 °F to 95 °F / 15 °C to 35 °C.
• When fully discharged, you may also shave with the
shaver connected to an electrical outlet via the special
cord set.
Indicator lights
Pilot light (11): The shaver is connected to an electrical
outlet.
Model 550:
When the shaver is fully charged, all five
charging lights (7) will light up (20% per light), provided
the shaver is connected to an electrical outlet or switched
on.
0..20
40
60
0...20
40
60
80
100
empty
charge
5647320_Com_550_NA Seite 6 Freitag, 7. März 2008 10:25 10