Filter
Top Products
3
English
Please read the use instructions carefully and
thoroughly before using the appliance.
Caution
Keep the appliance out of the reach of
children.
When using the appliance for the first time,
start by testing it on a small area of your arm.
If any sensitivity or allergic reaction occurs,
discontinue the use immediately. Do not use
the appliance on irritated skin.
Description
1 Protective cap
2 Regular cutting head
3 On/off switch (I/0)
4 Battery compartment cover
5 Stand
6 Short trimming comb (5 mm /
1
/
5
")
7 Long trimming comb (8 mm /
1
/
3
")
8 Precision cutting head
9 Brush
Batteries
This appliance operates with one AAA 1.5 V
battery. For best performance, use an
alkaline manganese battery (type LR03, AM4,
AAA, e.g. Duracell).
• Make sure the appliance is turned off.
• Remove the battery compartment cover (4)
by pulling downwards (a).
• Insert the battery with the (+) and (–) poles
in the direction marked.
• Close the battery compartment.
Note: If the appliance is not used for long
periods of time, do not leave the battery
inserted (danger of leakage). Take an expired
battery out of the appliance immediately.
Used batteries should not be disposed
of with the household waste. Please
dispose of them at special collection
points or return them to your retailer or
authorised service centres.
Using the SilkFinish
Your SilkFinish comes with two ultra slim
cutting heads which have different cutting
area sizes. Both heads are uniquely con-
toured to closely and safely remove any
unwanted hair on every curve of your body
and face (eyebrowns, chin, upper lip etc.).
The regular cutting head (2) is ideal for re-
moving or trimming hair.
The precision cutting head (8) is perfect for
detailing and removal of stray hairs.
Getting started
• Remove the protective cap (1).
• Slide the on/off switch (3) up to turn the
appliance on.
• Place the cutting head against the hair to
be removed and guide it slowly against the
direction of hair growth. For optimum
results, pull the skin taut with one hand
while using.
• Turn the appliance off before changing the
cutting heads.
• To exchange cutting head (2) with cutting
head (8) and vice versa, rotate the head
counterclockwise 90°, then lift the head.
Attach the other head by inserting it into
the corresponding opening on top of the
body, then rotate 90° clockwise (b).
5363437_FG1000_AMEE2 11.07.2006 11:16 Uhr S