Filter
Top Products
2 3
Description
1
Shaver socket
2
Switch
3
Longhair trimmer
4
Cutterblock base
5
Duo cutterblock
6
Triple shaving fram
F
Twin foil
f
Integrated longhair cutter
7
Foil protection cap
8
Button for releasing the triple shaving frame
6
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you thoroughly enjoy your new Braun
appliance.
Caution
• Wattage: 3 W.
• Voltage range:
100 - 240 V
ȃ
50 / 60 Hz
(automatic adaption of voltage and frequency).
• This product conforms to the EMC-Requirements
as laid down by the Council Directive 89/336/EEC.
Specifications
This shaver is equipped with a pivoting head which
has a triple shaving system with an integrated
longhair cutter. The pivoting head swings to both
sides and thus automatically adjusts itself to the
contours of your face within its swinging angle. The
triple shaving frame
6
with its twin foil
F
and the
integrated longhair cutter
f
provide a permanent
combination shave.
This means that the integrated longhair cutter cuts
the longer hairs, while the twin foil
F
together with
the cutterblock
5
under the foil, provide a close
shave – all in one stroke.
• Do not use the shaver near or over basins filled
with water (e. g. bath tubs, showers etc.).
• Periodically check the cord for damages particu-
larly at each end where the cord enters the plug.
• Replace the cord for safety reasons, if it is loose in
the shaver socket
1
.
• Do not wind the cord around the shaver.
Braun Flex Integral 5015
Pivoting head and triple
shaving system
Switch positions:
0 = Off
1 = Shaving with the twin foil
F
and the integrated
longhair cutter
f
2 = Shaving with the pivoting head locked at an
angle to permit shaving under the nose or at the
hairline
3 = The longhair trimmer
3
is activated
Switch
2
• Connect the shaver to the mains.
• Take off the foil protection cap
7
.
• For shaving, push the switch
2
to setting «1».
• Hold the shaver at right angles (90°) to the skin
.
• Stretch the skin with your free hand.
• Guide the shaver smoothly against the direction of
beard growth, applying only gentle pressure.
The pivoting cutting system (twin foil
F
and
integrated longhair cutter
f
follows the contours of
your face automatically.
While shaving difficult parts of your face (e. g. under
the nose or at the hairline), push switch
2
to setting
«2», to lock the pivoting head at an angle.
Shaving