Filter
Top Products
9
switched off during brushing.
Only when pausing longer
than 30 sec. the timer resets
to the initial starting point.
Pressure Sensor
For optimal brushing results
your toothbrush has a
pressure control feature to
help you brush gently. This
helps protect your gums from
excessive brushing and makes
your toothbrush easy to
operate. If too much pressure
is applied, the oscillating
movement of the brush head
will continue but the pulsation
will stop. In addition to feeling
it, you can also hear a different
sound.
In the first days of using the
toothbrush, your gums may
bleed slightly. In general,
bleeding should stop after a
few days. Should it persist
after two weeks, please con-
sult your dentist or hygienist.
Dentists recommend that you
replace any toothbrush every
3 months. The INDICATOR
bristles help you monitor
and improve your brushing
performance. With proper
brushing, twice a day for two
minutes, the blue colour on
the INDICATOR bristles will
fade halfway approximately
within 3 months, signaling it is
time to change the brush head
(1a-1c).
Replacement brush heads are
available at your retailer or
Oral-B Braun Service Centres.
Cleaning
After use, rinse the brush head
for several seconds under
running water with the handle
switched on. Then switch off
the handle and remove the
brush head. Rinse both parts
separately under running
water (2) and wipe them dry.
From time to time, also clean
the charging unit with a damp
cloth (3).
Subject to change without
notice.
This product conforms to
the European Directives
EMC 2004/108/EC and
Low Voltage 2006/95/EC.
V
3746160_D16_cls.indd 93746160_D16_cls.indd 9 12.12.2007 8:51:14 Uhr12.12.2007 8:51:14 Uhr