Filter
Top Products
8
2 Rub your skin to lift short hairs. For
optimum performance hold the ap-
pliance at a right angle (90°) against
your skin. Guide it in a slow, con-
tinuous movement without
pressure
against the hair growth, in the direc-
tion of the switch. The SoftLift™ tips
will make sure that even flat lying hair
is lifted and removed thoroughly at
the root.
As hair can grow in different direc-
tions, it may also be helpful to guide
the appliance in different directions
to achieve optimum results.
Both rollers of the 4-way moving pain
softener should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate
and relax the skin for a gentler
epilation.
3 Leg epilation
(epilation head
2 with 4-way moving
pain softener
1)
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg
stretched out straight.
4 Underarm and bikini line epilation
(underarm epilation head
B without
attachment)
For this specific application, the
narrow underarm epilation head
has been developed. Thanks to its
specific design adapted to the
contours of these areas, it provides
a gentle and thorough epilation.
Please be aware that especially at
the beginning these areas are parti-
cularly sensitive to pain. With re-
peated usage the pain sensation
will diminish.
For more comfort, ensure that the
hair is at the optimum length of
2-5 mm.
Before epilating, thoroughly clean the
respective area to remove residue
(like deodorant). Then carefully dab
dry with a towel. When epilating the
underarm, keep your arm raised up
so that the skin is stretched and
guide the appliance in different
directions.
As skin may be more sensitive
directly after epilation, avoid using
irritating substances such as
deodorants with alcohol.
Cleaning the epilation heads
5 After epilating, unplug the appliance
and clean the epilation head used:
When cleaning the epilation head
2,
first take off the 4-way moving pain
softener
1 and brush out the rollers.
6 To clean the tweezer element, use
the cleaning brush dipped into alco-
hol. Turn the product around and
clean the tweezers with the brush
while turning the barrel manually.
7 Remove the epilation head by pres-
sing the release buttons
3 on the left
and right and pull it off.
Give the top of the housing a quick
clean with the brush. Place the epila-
tion head and the 4-way moving pain
softener back on the housing.
Subject to change without notice
This product conforms to the
EMC-Requirements as laid
down by the Council Directive
89/336/EEC and to the Low Voltage
Regulation (73/23 EEC).
5318424_S6-60 Seite 8 Donnerstag, 19. September 2002 2:59 14