Filter
Top Products
12
5 Charging lights (green)
6 Low-charge light (red)
7 Replacement light for shaving parts
8 Shaver power socket
9 Special cord set
10 Etui *
11 Protection cap *
* not with all models
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for shaving is 15 °C to
35 °C. Do not expose the shaver to temperatures higher than 50 °C for
extended periods of time.
• Using the special cord set (9), connect the shaver to an electrical outlet with
the motor switched off. When charging for the first time
or when the shaver
is not used for a few months
, leave the shaver to charge continuously for
4 hours.
• Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
• A full charge provides up to 45 minutes of cordless shaving time depending
on your beard growth. However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by con-
necting the shaver to an electrical outlet via the special cord set.
• 5-minute quick charge is sufficient for a shave.
Charging lights (5)
The green charging lights show the charge status of the batteries
(330s/320s: 1 charging light). The green charging light blinks when the
shaver is being charged or switched on. When the battery is fully charged,
all green charging lights (330s/320s: 1 charging light) shine permanently,
provided the shaver is connected to an electrical outlet.
Low-charge light (6)
The red low-charge light flashes when the battery is running low.
You should be able to finish your shave.
97144170_360s_320s_S6-76.indd 1297144170_360s_320s_S6-76.indd 12 10.09.14 11:5010.09.14 11:50
CSS APPROVED Effective Date 22Sep2014 GMT - Printed 30Oct2014 Page 11 of 75