Filter
Top Products
English
-5-
Assembly
Warning! Make sure that the appliance is
switched off and unplugged.
Fitting and removing the attachments
(Fig. A)
• Allow the appliance to cool before
changing the attachments.
• Fit the diffuser nozzle (6) or the
concentrator nozzle (5) by pushing it
onto the outlet sleeve until it snaps into
place. Removed the item by pulling it
from the appliance.
Use
Warning! The appliance may be hot during
use and during the cool-down period.
Switching on and off (Fig. B)
• The speed control switch (3) has three
positions: off, slow and fast.
• Move the switch to position 0 to switch
the appliance off.
• Turn the switch to position 1 for blowing
air at a slow speed.
• Turn the switch to position 2 for blowing
air at a high speed.
Heat control (Fig. B)
• The heat control switch (2) has three
positions: warm, hot and very hot.
• Move the switch to position 1 for normal
warm air.
• Move the switch to position 2 for hot air.
• Move the switch to position 3 for very
hot air.
Diffuser and concentrator nozzles
• Fit the concentrator nozzle (5) for
general hair drying and styling.
• To add volume and lift, fit the diffuser
nozzle (6).
Cool shot button (Fig. B)
• Press and hold the cool shot button (1)
to set your individual style.
Cleaning and maintenance
Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
• Remove any loose hair which may have
become trapped in the diffuser or the
rear filter.
• Open the rear cover (7) and remove hair.
• Do not try to disassemble or repair the
hair dryer yourself.
• Switch off the appliance before cleaning,
changing accessories or touching any
parts which move in use.
Always clean the appliance immediately
after use.
Clean the appliance with a damp cloth.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other
liquid.
Warning! Do not wash any parts in a
dishwasher.
Technical Data
PX1800
Voltage V 220-240
Power Input W 1600-1800
Weight g 632