Filter
Top Products
- 6 -
Startup
Before starting up the appliance, make certain that ...
– the appliance and the accessories are in perfect
working order,
– all packaging material has been removed.
If necessary, clean the accessories as described
under “Cleaning and care”.
Attaching/detaching
accessories
ƽ Caution:
After operation, the appliance components may
be hot!
To attach an accessory ...
• push it onto the accessory connector Ạ and turn
it in anti-clockwise direction until you hear it click
into place.
The arrow symbols on the attachment and
on the accessory connector must correspond.
To detach an accessory ...
• switch off the appliance first and allow it to cool
down
• Press the eject button ạ and turn the acces-
sory in clockwise direction.
The accessory can now be easily removed from the
connector Ạ .
Switching on/off /
Selecting a heat level
After having attached the desired accessory and
plugged the power plug into the power socket ...
you can switch on the appliance using the switch
ả and select the level:
"1"for low fan speed
"2"for high fan speed
With the Cool-Shot button Ả you can gene-
rate a cold air flow at any fan speed. Press the
Cool-Shot button Ả , until it engages.
You can switch off the appliance by pushing the
level switch ả to "0" (= appliance off).
Cleaning and care
ƽ Never open the casing of the appliance. No
operating elements are located inside the
device. An open housing can create the risk of a
life-threatening electrical shock.
Before cleaning the device, ....
• always disconnect the power plug from the
power socket
• and allow the appliance to cool down
completely.
ƽ You must under no cirumstances immerse the
appliance components in water or other li-
quids! Danger to life by an electric shock will
be caused, if residual liquids contact live parts
the next time the appliance is used.
• Clean the appliance components with a dry or
slightly damp cloth – and carefully dry all parts
afterwards.
IB_KH5520_E274_UK_4 28.08.2007 12:08 Uhr Seite 6