Filter
Top Products
Axis Edge |14| english
Axis Edge |15| english
> After recharging, be sure to pull out
the power cord plug of the AC adaptor
from the outlet.
* When unplugging the AC adaptor, do
not pull the power cord, as this may
cause a malfunction. Be sure to hold the
plug when pulling it out.
USING YOUR SHAVER WITH THE AC POWER
SUPPLY
Checking to see that the power switch is
off, insert the power cord of the AC adaptor
securely into the socket at the bottom of the
shaver, and then, insert the outlet plug into
the outlet. Then, slide the power switch on.
> With the shaver connected to the AC
Power
switch
low battery
LED indicator
adapter, should the shaver not operate by sliding the power switch on,
the rechargeable battery is completely depleted. In this case, slide the
power switch off, allow the shaver to charge for 1 minute, and then slide
the power switch back on.
> After each use, make sure to slide the power switch off, and then
unplug the AC adapter from the outlet and from the shavers recharg-
ing socket.
> If your environment is humid, such as a bathroom, do not use the
shaver with its AC power supply.
> Do not use soap or shaving foam around the AC power supply when
in use.
Note: The AC power stored in the rechargeable battery slowly decreases
even when the shaver is connected with the AC power supply. Recharge
the shaver’s battery once every three (3) weeks to maintain an optimal
charge.
ON