Filter
Top Products
Aruba Mobility Controller Configuration Guide
VIEW Certified
Page 10
CLI Commands Required Settings
Default
Settings
Description
Tx-power <0-4> 0 As per the environment. This
need not be set if ARM is
enabled.
Channel <x> 1 This is the channel assigned to
the radio. Need not be set if
ARM is enabled.
802.11b/g rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
5,11
802.11b/g Tx rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
1,2,5,11 The supported Tx rates for
802.11b/g.
802.11b/g rates (if
all wireless client
are 802.11g)
These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
5,11
802.11b/g Tx rates
(if all wireless client
are 802.11g)
These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
1,2,5,11
802.11a rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
6,9,12,24
802.11a Tx rates These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to support
data rates.
6,9,12,18,24,
36,48,54
The supported Tx rates for
802.11a.
ESSID <voice ssid as configured> Aruba This is the ESSID that the voice
devices would associate with.