Filter
Top Products
Page 4 March 2005 Revision B
1.1 INTRODUCTION & OPENING THE PRODUCT PACKAGE
For protection during transit the Avanti is packed in a cardboard carton, together
with Guidance Information. The chair is supplied fully assembled in the folded
condition. A storage/carry bag is included.
Each chair has its own specific identification code label at the back of the chair. This
code together with other product information such as occupant weight limit should
also be noted. Labelling on the product is permanent, to bring user attention to
important safety requirements and should not be removed.
All the information should be read and understood, then kept in a safe place, and
available for reference. Users are responsible for ensuring that the product is used
safely and correctly according to the information supplied.
Service requirements will depend upon the degree of actual use. We recommend
that a chair used frequently be checked over by an authorised service department
every twelve months.
Packaging should be disposed of carefully and safely after an initial period of use.
1.2 PREPARING THE CHAIR FOR USE:
This section will familiarise you with the main parts of the chair, and take you
through the routine operations required before the Handling Chair can be used.
It is useful to practice these until you are confident that you can do them easily.