Filter
Top Products
English
- 10 -
LICHTTECHNIK
2.7 The Electronic Ballast must be used only according to the directions in this
"Operating Instruction". The manufacturer shall not be liable for any damages caused by
unintended use or wrong operation.
2.8 The user of the Electronic Ballast is urgently requested to observe the
following instructions:
l Dispose of packing material properly.
l Do not place the ballast into operation if damages are apparent.
l To assure safe operation, use EB only according to the information given in these
operating instructions, connect it as shown on the serial number plate.
l In case of malfunction, disconnect the EB from mains (pull out the line plug).
l Repairs, exchange of replacement parts and manipulations on the EB must be carried
out by a qualified personnel or ARRI service only.
l Use only original spare parts for repairs.
l Use only original accessories.
l Make worn-out Electronic Ballasts inoperable immediately. Then dispose of the
Electronic Ballast properly.
l Make sure that children do not operate the EB.
l Always switch off the EB and pull out line plug before you clean it or do
maintenance work on it.
l Clean EB dry only or with a moist cloth. Never immerse it into water.
l Do not use the connection cables of the EB for carrying, do not pull them over sharp
edges, clamp them under doors or clamp them in any other way.
l Switch off EB when it is not needed.