Filter
Top Products
10 11
OPERATION
Batteries are not required for proper operation. The user
interface is powered from the Equipment Control Module.
power loss.
saves the Home Comfort Control’s settings in case of a
or Equipment Control Module power.
defaults.
RESET
BUTTON
BATTERY INSTALLATION
WARNING
The reset button should only be used by the installer.
INDOOR AIR QUALITY FUNCTIONS
Press [AIR CLEANING] on the Home screen to enter
the Air Cleaning screen.
modes. Air cleaning will activate the fan for the purpose
of air cleaning.
Off: The air cleaner will not call the fan for the purpose
of air cleaning. Note:
cleaning will still occur during normal fan operation
Constant Clean: This option will provide the maximum
Automatic: The air cleaner will run a minimum of
30 minutes every hour. The air cleaner will monitor
the amount of time your heating and cooling system
runs; if 30 minutes is not reached the air cleaner will
automatically turn on. This will maximize the amount of
air cleaning while minimizing energy consumption.
Event Clean (3 hour cycle):
cleaner will run for 3 hours continuously and then return
Clean. This option only cleans the air when needed; an
Allergies (24 hour cycle): When seasonal allergies
Note: The Home Comfort Control will manage fan and
air cleaning selections when the selections overlap.
EVENT-BASED
™
AIR CLEANING