Filter
Top Products
10
INTELLIGENT SHARING OF INFORMATION
Your Intelligent Zoned Comfort Control System goes beyond the functionality already described to give you the ultimate in
convenience. The system allows you to control, make changes, or monitor the following parameters from any one
or all of
your thermostats.
• Mode of operation – Heat, Cool, Off or Emergency Heat
• Fan operation
• Hold status: Temporary, Holiday or Permanent
• Outdoor temperature
• Indoor relative humidity
• Extend blower operation for enhanced humidifier operation
• Service Indicators
– Change air filter
– Service humidifier
– Change UV lamp
– HVAC service
You also have the ability to program the zones name or identification to personalize and simplify your system.
Consult your Model 8570 Thermostat Owners’ Manual for details.
SYSTEM PRESSURE RELIEF
With a Zone Control System, some form of pressure relief must be designed into the system to assure proper operation and reduce
the possibility of noise due to airflow. The method of pressure relief that has been designed into your system could include use of
a bypass damper or the Aprilaire method of controlled pressure relief. With the controlled pressure relief method, a predetermined
amount of air is allowed to pass through a closed damper. The amount of air that is passed by each damper (the bypass) is not
enough to cause a noticeable temperature change in a non-calling zone, but is enough to relieve the higher system pressures.
So, if you feel small amounts of air entering into a non-calling zone, what you are feeling is the bypass air.
Remember, this bypass is normal and provides pressure relief for the system without causing a noticeable change
in temperature within that zone.